Connect The Cables - Avaya S8700 Manual

Connect the Cables

Connect IP Telephones, PCs, servers, routers, workstations, and hubs
1 Connect the Ethernet connection cable (not supplied) to a 10/100 Mbps port on the front
panel of the Avaya P333T-PWR.
NOTE:
You should use standard RJ-45 connections. You must use CAT-5 cable for 100 Mbps
operation.
Connect the other end of the cable to the Ethernet port of the PC, server, router,
2
workstation, IP phone, switch or hub.
NOTE:
Use a cross cable when connecting the Avaya P333T-PWR to a switch or hub.
3 Check that the appropriate link (LNK) LEDs light up.
May 2002
Installing the S8700 IP Connect
161