Install the Queue Warning Indicator
The connections for the queue warning indicator are the same as external ringing. An AC
indicator (lamp) such as a 21C49 can be used in a Uniform Call Distribution/Direct
Departmental Calling (UCD/DDC) queue.
The lamp is connected to an information outlet. The media gateway side of the MDF is
connected to an analog line circuit pack located in a port carrier.
Wire the queue warning indicator to the information outlet as shown in
1
4-Pair Modularity'' on page 144
120.
and
''Example Adjunct Power Connections'' on page
May 2002
Installing the S8700 IP Connect
''3-Pair and
145