Test 302C Attendant Console; Test Selector Console; Test External Ringing - Avaya S8700 Manual

Test 302C Attendant Console

Check all lamps are operational and call another telephone in the configuration.
1 Simultaneously press and hold the Ringer Volume up button and the POS BUSY button.
This puts the console in the self-test mode.
NOTE:
Releasing the buttons returns the console to normal mode.
2 Verify all lamps on display light and remain lighted.
Each row of lamps on the console lights and goes dark in sequence from top to bottom.
3 Press Start and listen for dial tone.
4 The green lamp associated with Idle Call Appearance lights up.
The Position Available lamp goes dark.
5 Dial number associated with a working telephone.
Audible ringing tone is heard in ear piece.
6 Press Release.
Audible ringing tone is silenced. The green lamp associated with idle call appearance
button goes dark. The Position Available lamp lights.

Test Selector Console

Check that all selector console lamps are operational. Make call to a telephone in the
configuration.
Simultaneously press and hold the Ringer Volume up button and the POS BUSY button
1
on the attendant console. This puts the console in the self-test mode.
Each row of lamps on the selector console lights and goes dark in sequence from top to
2
bottom.
3 Press hundreds group select button. The hundreds group select lamp lights and any lamps
associated with busy telephone light.
4 Press Direct Extension Selection (DXS) button for the desired extension. Audible
ringing tone is heard in the ear piece on attendant console.
5 On attendant console, press Release. Audible ringing tone is silenced.

Test External Ringing

Make a test call to the attendant console to verify ringing device sounds when the Night lamp on
console is lighted. If ringing device has not been installed by customer, connect spare telephone
to information outlet reserved for ringing device and make test call.
May 2002
Installing the S8700 IP Connect
197