Speedometer Calibration - Mercury 225 EFI Service Manual

3.0 litre work, electronic fuel injection
Hide thumbs Also See for 225 EFI:
Table of Contents

Advertisement

WIRING DIAGRAMS
FILL TO 1/2 THEN PRESS PLUS
BUTTON
[DFLT]
[SKIP]
FILL TO 3/4 THEN PRESS PLUS
BUTTON
[DFLT]
[SKIP]
FILL TO FULL THEN PRESS PLUS
BUTTON
[DFLT]
[SKIP]
DEPTH SENSOR OFFSET
[DOWN]
[SAVE]
DEPTH ALARM
[DOWN]
[SAVE]
EMPTY TANK THEN PRESS PLUS BUT-
[DFLT]
[SKIP]

Speedometer Calibration

Quick Cal – This calibration for setting lighting and contrast.
1. Press in the
2. Press
Cal1 – This calibration level lets you turn on and off the system screens. You may configure
the system to display as little or as much information as you prefer.
1. Press in the
see the calibration1 ( Cal1 ) screen.
2. Press
Cal2 – This calibration level lets you configure the system sensor inputs.
1. Press in the
tion2 ( Cal2 ) screen.
2. Press
Page 2D-50
[SAVE]
[SAVE]
[SAVE]
[UP]
[UP]
TON
[SAVE]
TROLL
MODE
and
+
MODE
to advance through the lighting and contrast sections.
TROLL
MODE
and
+
MODE
to advance through the calibration selections.
TROLL
MODE
and
+
MODE
to advance through the calibration selections.
You can choose to have tank at 1/2 and hit SAVE, or hit DFLT and
a default value will be entered based on the capacity of the tank.
You can choose to have tank at 3/4 and hit SAVE, or hit DFLT and
a default value will be entered based on the capacity of the tank.
You can choose to have tank at full and hit SAVE, or hit DFLT and
a default value will be entered based on the capacity of the tank.
Lets you electronically configure a depth offset. Entering a nega-
tive number gives you a water line offset. A positive number gives
you a keel offset.
Lets you enter a depth value. When the depth transducer reads
that value or below, the shallow water alarm will sound.
You can choose to have an empty tank and hit SAVE, or hit DFLT
and a default value will be entered based on the capacity of the
tank.
buttons for up to 2 seconds to get to Quick Cal screen.
buttons and hold for approximately 7 seconds until you
buttons and hold for approximately 10 seconds for calibra-
90-884294 OCTOBER 2001

Advertisement

Table of Contents
loading

This manual is also suitable for:

250 efi3 liter work 225 efi3 liter work 250 efi

Table of Contents