CHARGING & STARTING SYSTEM
8. Place springs and brushes into brush holder and hold in place with brush retainer tool.
a -
b -
9. Install armature into starter frame and align match marks (a). Install commutator end
cap onto starter frame and align match marks (b). Remove brush retainer tool. Install
through bolts and torque to 70 lb. in. (8.0 N·m).
a -
b -
c -
Page 2B-36
a
Bushing Retainer Tool
Bushing (do not over lubricate)
c
a
b
Alignment Marks
Alignment Marks
Bolts [Torque to 70 lb. in. (8 N m)]
b
c
90-884294 OCTOBER 2001
11661
11648