Mercury 225 EFI Service Manual page 586

LEFT HAND NON-RATCHETING
2. Remove the bearing carrier retainer following step a or b as follows:
DO NOT drill into the gear housing retainer threads when using the following pro-
cedure for removing the retainer
a. If the retainer is corroded in place, drill 4 holes in the retainer and fracture the re-
a -
b. Remove the bearing carrier retainer using the Bearing Carrier Retainer Wrench
a -
Page 6B-22
tainer with a chisel. Pry the remaining segments out.
Drilled Holes
(91-61069).
Bearing Carrier Retainer Wrench
CAUTION
a
a
23356
70491
90-884294 OCTOBER 2001