LEFT HAND NON-RATCHETING
7. While pressing in on speedometer hose junction, pull out on hose to disconnect.
a -
b -
8. Loosen the side mounting locknuts. (DO NOT attempt to remove one nut before oppo-
site side is loosened sufficiently, or gear housing could be damaged.)
a -
9. Pull gear housing away from drive shaft housing as far as the loosened nuts (in Step
8) will allow, then remove loosened nuts. (DO NOT allow gear housing to fall, as it now
is free.)
10. Pull gear housing from drive shaft housing.
Page 6B-14
a
Press in on Junction
Pull out on Hose
a
Side Mounting Locknuts
b
90-884294 OCTOBER 2001
57735