Oil Seal Carrier Assembly - Mercury 225 EFI Service Manual

LEFT HAND NON-RATCHETING
19. Bend one tab aft (outward) into a space between two of the notches of the retainer.
Bend all the remaining tabs forward (inward).
a -
b -
c -
d -

Oil Seal Carrier Assembly

Installation
NOTE: Apply hand pressure only to install the oil seal carrier into position. Do not hammer
it into position.
1. Lubricate the oil seal carrier, oil seal lips, space between seals and O-ring with 2-4-C
Marine Lubricant with Teflon and install the oil seal carrier over the drive shaft and into
the gear case.
a -
b -
c -
Page 6B-96
a
c
b
Bearing Carrier
Tab
Retainer Notches
Alignment Tabs (Bend Inward)
a
c
Oil Seal Carrier
Oil Seal Lips
O-ring
d
b
70490
70501
90-884294 OCTOBER 2001