Mercury 225 EFI Service Manual page 142

7. Install field frame over armature.
8. While holding brushes back, slide brush plate onto armature while aligning brush lead
grommet with slot in field frame.
9. Secure end plate to brush assembly with 2 screws. Torque screws to 30 lb-in (3.4 Nm)
NOTE: Prior to installing field frame assembly into drive housing, align slot in field frame
with plug in drive housing.
a -
b -
c -
d -
e -
g -
90-884294 OCTOBER 2001
b
d
Armature
Field Frame Grommet Slot
Brush Plate
Brush Lead Grommet
End Plate
f - Screws [Torque to 30 lb-in (3.4 Nm)]
Field Frame Plug Slot
g
a
c
e
f
CHARGING & STARTING SYSTEM
58435
Page 2B-51