Lubrication Points - Mercury 225 EFI Service Manual

MAINTENANCE

Lubrication Points

Lubricate Point 1 with Special Lubricant 101.
1. Trim Rod Ball Ends – Turn the ball ends to work the lubricant into the ball sockets.
Lubricate Point 2 with Anti-Corrosion Grease or 2-4-C Marine Lubricant with Teflon.
2. Propeller Shaft – Refer to Propeller Replacement for removal and installation of the
propeller. Coat the entire propeller shaft with lubricant to prevent the propeller hub
from corroding and seizing to the shaft.
Lubricate Points 3 through 6 with 2-4-C Marine Lubricant with Teflon or Special Lubricant
101.
3. Swivel Bracket – Lubricate through fitting.
4. Tilt Support Lever – Lubricate through fitting.
5. Tilt Tube – Lubricate through fitting.
Page 1B-8
1
2
5
1
3
4
57834
90-884294 OCTOBER 2001