Mercury 225 EFI Service Manual page 355

15. Remove lower end cap from crankshaft.
16. Remove and discard O-ring seal from end cap.
17. Remove oil seals from end cap by driving seals out with a punch and hammer.
18. Inspect roller bearing in upper end cap as outlined in "Cleaning and Inspection".
NOTE : If roller bearing is damaged, replace roller bearing carrier assembly.
90-884294 OCTOBER 2001
a
a - O-ring
b - Seal
a
a - O-Ring
b - Seal
c - Carrier
b
b
c
POWERHEAD
51849
51473
Page 4A-43