Mercury 225 EFI Service Manual page 426

19. Install lower mount retainers and secure each retainer with 2 bolts. Secure ground
strap with the nearest retainer bolt and flat washer. Torque bolts to 20 lb. ft. (27 Nm).
20. Install lower mount covers and secure each cover with a screw.
a
a -
b -
c -
21. Install upper mount cover on adaptor plate. Secure cover with 3 bolts. Torque bolts
to 20 lb. ft. (27 Nm).
22. Route power trim harness thru grommet in adaptor plate.
23. Reinstall shift shaft with bushing into adaptor plate. Apply 2-4-C Marine Lubricant with
Teflon to bushing.
e
a
f
g
95
2-4-C Marine Lubricant with Teflon
95
a -
b -
c -
d -
90-884294 OCTOBER 2001
c
b
52308
Lower Mount Retainer
Bolts [Torque to 20 lb.
ft. (27 Nm)]
Ground Strap
d
c
Shift Shaft Linkage
Exhaust Adaptor Plate
Upper Mount Cover
Bolts [Torque to 20 lb.
ft. (27 Nm)]
CLAMP/SWIVEL BRACKETS & DRIVE SHAFT HOUSING
d
d - Cover
e - Screw (1 for each cover)
b
e - Power Trim Harness
f - Grommet
g - Bushing
e
52307
58005
Page 5A-15