Propeller Shaft Assembly And Forward Gear Bearing Cup - Mercury 225 EFI Service Manual

RIGHT HAND NON-RATCHETING

Propeller Shaft Assembly and Forward Gear Bearing Cup

REMOVAL
1. Tilt the propeller shaft to the port side of the gear housing and remove the shaft by
pulling it straight up and out.
a -
b -
c -
d -
2. Remove the forward gear bearing cup and shims. Measure and make note of the shim
thickness. If the shims are not damaged, they may be reused.
a -
b -
c -
d -
e -
g -
h -
Page 6A-32
d
c
Propeller Shaft Assembly
Shift Spool
Shift Crank
Thrust Washer (Reverse Gear)
d
c
a b
Puller Shaft (91-31229)
Nut (11-24156)
Washer (91-34961)
Guide Plate (91-816243)
Puller Head (from Slide Hammer Puller Kit 91-34569A1)
f - Jaws (from Slide Hammer Puller Kit)
Bearing Cup
Shims
a
b
g
e
f
58016
h
50780
90-884294 OCTOBER 2001