Mercury 225 EFI Service Manual page 201

SPEEDOMETER CALIBRATION CAL 1 LEVEL
REMOTE LCD LIGHT?
[NO] [SAVE]
REMOTE LCD CONTRAST?
[NO] [SAVE]
TIME
[NO] [SKIP]
TIME FORMAT
[SAVE]
[DOWN]
USE GPS TIME?
[DOWN]
[SAVE]
CALIBRATION HOUR 12:00 AM
[SAVE]
[DOWN]
DISPLAY UNITS
[DOWN] [SAVE]
SPEED UNITS
[SAVE]
[DOWN]
TO WAY POINT SCREEN?
[NO]
[SAVE]
SIMULATOR MODE?
[SAVE]
[NO]
[NO]
EXTERNAL SENSORS
[SKIP]
90-884294 OCTOBER 2001
[YES]
[YES]
[EDIT]
[UP]
[UP]
[UP]
[UP]
[UP]
[YES]
[YES]
EXIT?
[YES]
[CAL2]
[EDIT]
Enables you to set the lighting levels on all the SC1000 simulta-
neously from this gauge.
Enables you to control the contrast from another System TACH/
Speed simultaneously from this gauge.
Allows you to set the time.
Choose between a 12 hour and 24 hour format.
If you have a GPS connected this feature enables the gauge to
let the GPS update the gauges internal clock.
Adjust the gauges internal clock to match your local time. First
set the hours then press MODE button to set the minutes.
Lets you change units of measurement between English (stan-
dard) or Metric.
Lets you select the units at which speed is displayed. You can
choose from MPH (Miles Per Hour), KTS (Knots), or KMH (Kilo-
meters Per Hour).
If you have a GPS connected you can turn on the screen that
shows your distance and fuel to a way point.
Do you want to turn on a simulation mode? (Used for demonstra-
tion purposes).
Do you want to exit calibration? Or jump straight into calibration
level 2?
This lets you enable or disable external sensor inputs.
WIRING DIAGRAMS
Page 2D-51