Mercury 225 EFI Service Manual page 657

12. Lubricate the large O-ring with 2-4-C Marine Lubricant with Teflon and assemble into
the gear housing as shown following.
95
a -
13. Prepare the bearing carrier for installation as follows:
a. Lubricate the outer diameter of the bearing carrier with 2-4-C Marine Lubricant
b. Fill the space between the carrier oil seals with 2-4-C Marine Lubricant with Teflon.
c. Lubricate the needle bearing with Premium Gear Lubricant.
14. Install the bearing carrier assembly into the gear housing.
87
95
a -
90-884294 OCTOBER 2001
a
2-4-C Marine Lubricant with Teflon
O-ring
with Teflon.
87
a
Premium Gear Lubricant
2-4-C Marine Lubricant with Teflon
Bearing Carrier Assembly
LEFT HAND NON-RATCHETING
95
95
95
50886
50826
Page 6B-93