Table of Contents
Advertisement
Section 1 - Getting to Know Your Power Package
Before each use, inspect the lanyard cord to ensure that it is in good working condition and that there are no breaks, cuts, or
wear to the cord. Check that the clips on the ends of the cord are in good condition. Replace any damaged or worn lanyard
cords.
Instrumentation
VesselView
Your power package may be connected to a SmartCraft VesselView display. VesselView 7 is a comprehensive boat
information center that can display information for up to four gasoline or diesel engines. It continuously monitors and reports
basic operating data including detailed information such as seawater temperature and depth, trim status, boat speed and
steering angle, and the status of fuel, oil, water, and waste tanks.
VesselView can be fully integrated with a vessel's global positioning system (GPS) or other NMEA‑compatible device to provide
up‑to‑the‑minute navigation, speed, and fuel‑to‑destination information.
VesselView 4 and 7 are equipped with a micro SD card port that allows an authorized OEM or dealership to import the
personality configuration. It can also be use by the owner to import pictures or graphics. When more than one VesselView is
used, either as a triple or quad‑engine application for multiple helms, the same mico SD card can be used to download those
configurations.
Refer to your VesselView operations manual for detailed instructions on how to operate this display.
SmartCraft Speedometer, Tachometer, and Digital Gauges
The SmartCraft instrument package augments the information provided by VesselView. The instrument package may display:
•
Engine RPM
•
Boat speed
•
Coolant temperature
•
Oil pressure
•
Battery voltage
•
Fuel consumption
•
Engine operating hours
Page 6
VesselView
52421
90-8M0113988
DECEMBER 2015
eng
Advertisement
Table of Contents
Troubleshooting
