Securing Outboard To Boat Transom; Steering Cable - Mercury 225 EFI Service Manual

OUTBOARD MOTOR INSTALLATION

Securing Outboard To Boat Transom

1. Refer to "Determining Recommended Outboard Motor Mounting Height", preceding
and install outboard to the nearest recommended mounting height.
2. Fasten outboard with provided mounting hardware shown.
a -
b -
c -

Steering Cable

STARBOARD SIDE ROUTED CABLE
1. Lubricate O-ring seal and entire cable end.
2-4-C Marine Lubricant with Teflon
95
Page 1D-4
b
c
1/2 in. Diameter Bolts
(4)
Flat Washers(4)
Locknuts (4)
95
d
a
e
d - Flat Washers(4)
e - Marine Sealer - Apply to
Shanks of Bolts, Not
Threads
90-884294 OCTOBER 2001