Mercury 225 EFI Service Manual page 424

3. Position exhaust tube and gasket on adaptor plate. Secure both to plate with 6 bolts.
Torque bolts to 21 Ib. ft. (28.5 Nm).
4. Secure tube to adaptor plate with 2 bolts. Torque bolts to 80 lb. in. (9 Nm).
a -
b -
c -
5. Position adaptor plate on top of housing.
6. Secure adaptor plate to drive shaft with 4 bolts. Torque bolts to 25 lb. ft. (34 Nm).
a -
90-884294 OCTOBER 2001
c
Exhaust Tube
Gasket
Water Tube
a
Bolts [Torque to 25 lb. ft. (34 Nm)]
CLAMP/SWIVEL BRACKETS & DRIVE SHAFT HOUSING
a
b
a
58003
Page 5A-13