Mercury 225 EFI Service Manual page 421

CLAMP/SWIVEL BRACKETS & DRIVE SHAFT HOUSING
4. While applying upward pressure on rear of adaptor plate, use a mallet and a piece of
hardwood against the adaptor plate to loosen gasket adhesion.
a -
5. Remove 2 bolts securing water tube to adaptor plate and remove tube. Remove 6
bolts securing exhaust tube to adaptor plate.
a -
b -
c -
Page 5A-10
Adaptor Plate
c
Bolts
Exhaust Tube
Water Tube
a
a
b
90-884294 OCTOBER 2001