Advertisement
Key Features
Indicators
Four indicators are located on back of the housing to report installation/alignment conditions, bridge
status, radio activity, and Ethernet activity. The indicators are shown in
Figure 1-2
1
2
3
4
•
•
•
Cisco Aironet 1400 Series Wireless Bridge Hardware Installation Guide
1-4
D R A F T - C I S C O C O N F I D E N T I A L
Bridge Connectors and Indicators
2
1
Power injector dual-coax ports
RSSI voltage port
Ethernet LED
The install indicator indicates installation mode is activated. During installation mode, the other
indicators provide signal strength readings used for antenna alignment.
The radio indicator blinks green to indicate radio traffic activity. The light is normally off, but it
blinks green whenever a packet is received or transmitted over the bridge radio link. This indicator
also provides signal strength readings during installation mode.
The status indicator signals bridge association status. Blinking green indicates that the bridge is not
associated with another bridge. Steady green indicates that the bridge is associated with at least one
other bridge. This indicator also provides signal strength readings during installation mode.
Figure
6
4
5
3
5
Status LED
6
Radio LED
7
Install LED
Chapter 1
Overview
1-2.
7
OL-4072-01
Advertisement
Chapters
