New Features - Cisco ASA Series Cli Configuration Manual

New Features

New Features
•
•
•
•
Note
New, changed, and deprecated syslog messages are listed in syslog messages guide.
New Features in ASA 9.0(3)/ASDM 7.1(3)
Released: July 15, 2013
Table 1-3
Note
Features added in 8.4(4.x), 8.4(5), and 8.4(6) are not included in 9.0(3) unless they were listed in the
9.0(1) feature table.
Table 1-2 New Features for ASA Version 9.0(3)/ASDM Version 7.1(3)
Feature
Monitoring Features
Smart Call Home
New Features in ASA 9.0(2)/ASDM 7.1(2)
Released: February 25, 2013
Cisco ASA Series CLI Configuration Guide
1-4
New Features in ASA 9.0(3)/ASDM 7.1(3), page 1-4
New Features in ASA 9.0(2)/ASDM 7.1(2), page 1-4
New Features in ASA 8.4(5)/ASDM 7.0(2), page 1-6
New Features in ASA 9.0(1)/ASDM 7.0(1), page 1-7
lists the new features for ASA Version 9.0(3)/ASDM Version 7.1(3).
Description
We added a new type of Smart Call Home message to support ASA clustering.
A Smart Call Home clustering message is sent for only the following three
events:
•
When a unit joins the cluster
•
When a unit leaves the cluster
•
When a cluster unit becomes the cluster master
Each message that is sent includes the following information:
•
The active cluster member count
•
The output of the show cluster info command and the show cluster
history command on the cluster master
Chapter 1 Introduction to the Cisco ASA