Manual Adjustment For Data Shift - Epson SC-F9200 Series Service Manual

SC-F9200 Series

4.11.7 Manual Adjustment for Data Shift

PURPOSE
To make the setting not to use the Head 2 nozzles that overlap with the Head 1 nozzles
in the sub-scanning direction.
Head 1
Figure 4-43. Manual Adjustment for Data Shift
PAPER USED
 Size: 24 inch length or longer
 Type: Premium Glossy Photo Paper (250)
EXECUTION MODE
Normal Mode
PROCEDURE
1. Load the paper into the printer.
2. Turn the printer ON.
ADJUSTMENT
Head 2
Overlapping nozzles
Head Related Checks and Adjustments
3. On the control panel, select the Media Setup
setting to RIP Settings "0".
4. Start the Service Program and select
5. Click [Print].
Adjustment pattern is printed.
Figure 4-44. [Manual Adjustment for Data Shift] Screen
6. Select the pattern with the fewest gap.
C H E C K
Use even numbers only.
P O I N T
7. Click [Run].
Save the parameter in printer.
8. Turn off the printer to finish the adjustment work.
SE Group Confidential (Related Staff Only)
Revision C
menu and change the Select Media
Manual Adjustment for Data Shift.
321