Epson SC-F9200 Series Service Manual page 33

SC-F9200 Series
Menu
Cleaning
Maintenance
Head Maintenance
Waste Ink Counter
Print Status Sheet
Printer Status
Firmware Version
IP Address Setting
Network Setup
Print Status Sheet
Restore Settings
PRODUCT DESCRIPTION
Table 1-17.
Menu Item/Setting Values (shaded one is the default)
All Nozzles
Head 1/Head 2
Head 1
Head 2
Selected Nozzles
Move Head
---
Print
XXXXXX,X_XX,XXXX
Auto
IP: XXX.XXX.XXX.XXX
Panel SM: XXX.XXX.XXX.XXX
DG: XXX.XXX.XXX.XXX
Print
Yes
No
Control Panel
Setup Menu
Checks the pattern numbers which blurring or space can be seen
Execute (Light)
in their check patterns. Selects all lines or the nozzle lines
Execute (Medium)
including the numbers, then executes head cleaning. When this
is set to [All Nozzles], executes head cleaning for all nozzles.
Execute (Heavy)
When [Selected Nozzles] is selected, selects nozzle lines and
executes head cleaning only for them. Select the cleaning level
from [Execute (Light)], [Execute (Medium)] or [Execute
Execute (Light)
(Heavy)]. Select [Execute (Light)] at first. When blurring or
Execute (Medium) space can be seen even though [Execute (Light)] is executed,
select [Execute (Medium)]. When blurring or space can be seen
Execute (Heavy)
even though [Execute (Medium)] is executed, select [Execute
(Heavy)].
Position the print head for maintenance. Perform such
maintenance as cleaning the wiper, caps, and the area around
print head only after using this option to position the head for
cleaning. Moving the print head manually could cause
malfunction.
If you replace the Waste Ink Bottle before being prompted by a
message indicating the replacement interval of the Waste Ink
Bottle in the control panel, run the Waste Ink Counter option
after replacement.
Prints the list of current Printer Setup status, product life or
periodic replacement parts status. You can check each piece of
information at once.
Displays the firmware version of the printer.
Sets the IP address, the subnet mask and the default gateway
manually.
Prints the list of current Network Setup.
Returns the set values of Network Setup menus to their factory
default.
Explanation
SE Group Confidential (Related Staff Only)
Revision C
33