Epson SC-F9200 Series Service Manual page 67

SC-F9200 Series
21. Start the printer in the Serviceman Mode.
Turn on the printer while pressing [Menu] + [Back] + [OK].
22. Select Ink Eject.
Select the corresponding color rows, and press the
cleaning liquid. (Page 332)
23. Select Switch between Ink cartridges and Ink
Select the corresponding color rows and
validate the ink tanks. (Page 329)
24. Turn off the printer.
25. Install the new ink tanks. (Page 207)
26. Install the chip units, and then pour ink into the ink tanks.
27. Lower the lock levers.
28. Turn on the printer.
29. Discard the waste ink.
30. Select Initial ink charge.
Select the corresponding color rows, and press the
initial ink charge. (Page 334)
31. Select Nozzle Check.
Select Nozzle Check Pattern Print, and press the
nozzle check. (Page 311)
32. Perform cleaning if necessary. (Page 313)
33. If the error persists, replace the Print Head.
TROUBLE SHOOTING
[Run] button to eject the
tanks.
Ink tank, and press the [Run] button to
[Run] button to perform the
[Run] button to perform the
Remedies for Print Quality Troubles
SE Group Confidential (Related Staff Only)
Revision C
67