SC-F9200 Series
3.4.10.4 Drying Fan Power Supply Board
(p252)
1.
Remove the Drying Fan Unit.
2.
Remove the Drying Fan Cover.
(p254)
3.
Disconnect the relay connector.
4.
Disconnect the cable from the connector (CN2) on the Power Supply Board.
5.
Remove the four screws, and remove the Power Supply Board.
A) Silver M3x8 S-tite screw: 4 pcs
DISASSEMBLY & ASSEMBLY
A
Disassembly and Assembly Procedure
Relay Connector
A
Power Supply Board
CN2
Figure 3-214. Removing the Power Supply Board
SE Group Confidential (Related Staff Only)
Revision B
A
A
256