Epson SC-F9200 Series Service Manual page 153

SC-F9200 Series
3.4.5.5 Head Relay FFC
1. Remove the Media Loading Lever.
2. Remove the Panel Unit. (p101)
3. Remove the Right Upper Cover.
(p110)
4. Remove the Left Rear Cover.
(p111)
5. Remove the Left Upper Cover.
(p116)
6. Remove the Upper Cover.
(p117)
7. Remove the Board Box Cover.
8. Remove the Cover. (See Step 14
9. Disconnect the Head Relay FFCs from the connectors (CN400, CN401, CN402,
CN403) on the Sub-D Board.
10. Remove the acetate tape, and release the Head Relay FFCs from the FFC clamp.
Sub-D Board
Figure 3-91. Removing the Head Relay FFC
DISASSEMBLY & ASSEMBLY
(p210)
(p103)
"3.4.5.4 Head FFC" (P. 150)
in )
Acetate tape
Head Relay FFC
CN400
CN401
CN402
CN403
Disassembly and Assembly Procedure
11. Disconnect the Head Relay FFCs from the connectors (CN400, CN401, CN402,
CN403) on the Main Board.
12. Pull out the Head Relay FFCs from the main body.
CN403
CN402
CN401
CN400
Main Board
Figure 3-92. Removing the Head Relay FFC
SE Group Confidential (Related Staff Only)
Revision B
FFC Holder
Head Relay FFCs
153