Exchange Parts - Epson SC-F9200 Series Service Manual

SC-F9200 Series

5.4 Exchange Parts

Exchange parts of this printer are as follows.
Note *1: M/C = Maintenance call
S/C = Service call
*2: See Chapter 2 "Troubleshooting" for details of maintenance call and service call.
*3: Replace the Ink Tank and PF Roller Center Support together at the same time.
*4: Replace the Ink Tube and CR Motor together at the same time.
Class
Wiper cleaner
Consumables
Wiper
Wasted Ink Bottle
Ink Tank
PF Roller Center
Periodic Replacement Parts
Support*
Mounting Plate Assy
Print Head
Duct CR
Ink Holder
Life Parts
Ink Tube
Pump Cap Unit
CR Motor
MAINTENANCE
Table 5-1. Exchange Parts
Parts Exchanger
User
*3
1.5 years on average

51.4 km
3

1.5 years

33km : when Take-up tension is max.

100km : when Take-up tension is default.

The number of fired ink droplets: 6,840,000,000,000

3 years or more after ink is charged
Serviceman 400,000 times (Pump counter)
Pump counter: 400,000 times
*4
The number of CR pass: 6,750,000
Rotation: 1,150,000 (3 years)
*4
The number of CR pass: 6,750,000 (3 years)
Life
---
---
---
Exchange Parts
Exchange Timing (call) *1*2
If the printout is faint or smudged, or segments are missing
even after cleaning.
If the printout is faint or smudged, or segments are missing
even after cleaning.
---

M/C: None

S/C: None

M/C: None

S/C: None

M/C: 00000400

S/C: None

M/C: None

S/C: None

M/C (Near end of life): 00000002

S/C: 1435

M/C (Near end of life): 00000080, 00400000

S/C: 1432, 1433

M/C (Near end of life): 00000200

S/C: 1101

M/C (Near end of life): 00000040

S/C: 1430, 1431

M/C: None

S/C: None
SE Group Confidential (Related Staff Only)
Revision B
373