Epson SC-F9200 Series Service Manual page 200

SC-F9200 Series
3.4.5.20 CR Unit
When replacing/removing this part, refer to
A D J U S T M E N T
R E Q U I R E D
Items and the Order by Repaired Part" (p260)
perform the specified operations including required adjustment.
(p98)
1. Unlock the CR Unit.
(p100)
2. Remove the Wiper Cleaner.
3. Remove the Media Loading Lever.
4. Remove the Right Upper Cover.
(p108)
5. Remove the Right Cover.
(p110)
6. Remove the Left Rear Cover.
(p111)
7. Remove the Left Upper Cover.
(p114)
8. Remove the Left Cover.
(p167)
9. Remove the APG Unit.
(p161)
10. Remove the CR Motor.
11. Remove the CR Cover. (p139)
(p140)
12. Remove the Duct CR.
(p144)
13. Remove the Print Head.
(p157)
14. Remove the CR Scale.
15. Remove the three screws, and remove the Pulley Holder.
A) Black M3x22 screw with washer: 1 pcs
B) Silver M3x6 S-tite screw with built-in washer: 2 pcs
DISASSEMBLY & ASSEMBLY
"4.1.2 Adjustment
and make sure to
(p210)
(p103)
Disassembly and Assembly Procedure
CR Timing Belt Holder
B
B
A
Figure 3-143. Removing the Pulley Holder
SE Group Confidential (Related Staff Only)
Revision B
CR Timing Belts
Pulley Holder
200