Setup Menu - Epson SC-F9200 Series Service Manual

SC-F9200 Series

1.5.1 Setup Menu

Menu
Media Remaining
Media Setup
Select Media
Customize Settings
PRODUCT DESCRIPTION
Table 1-17.
Menu Item/Setting Values (shaded one is the default)
ON
Remaining Setup
OFF
Length 1.0 to 999.5m (3 to 3000 ft)
Remaining Alert 1 to 15m (4 to 50 ft)
Print Remaining
Print
Length
1 to 30 (Media Setup Numbers)
RIP Setting
Current Settings
Setup Menu
Control Panel
Explanation
Selects [On] to indicate and record the remaining amount of the
set media, or [Off] to set it to off. When [On] is selected,
[Length], [Remaining Alert] and [Print Remaining Length] are
displayed to be set. Remaining amount is derived from the
setting values in [Length] and printed media length. It is
displayed on the Control Panel.
Sets the whole length of the set media between 1.0 to 999.5 m.
You can make this setting by 0.5 m.
Sets the value to display the Remaining Alert between 1 to 15
m. You can make this setting by 0.5 m.
Prints the remaining amount of the media.
Selects the media setting for printing.
When one of the values between 1 to 30 is selected, the printer
prints the media setting stored in the one of selected number. To
store the media setting in one of the numbers, set it in
[Customize Settings].
When [RIP Settings] is set, the printer prints in the media
setting set with software RIP.
Changes the current media setting. The items which can be
changed depend on which setting is selected, [RIP Settings] or
media number. For the items, refer to RIP Settings or the row of
1 to 30 as follows.
SE Group Confidential (Related Staff Only)
Revision C
24