Epson SC-F9200 Series Service Manual page 181

SC-F9200 Series
17. Remove the two clamps that secure the Guide Frame.
18. Remove the Guide Frame.
19. Remove the Joint Tank from the Tube Protection Plate.
Tube Protection Plate
Figure 3-123. Removing the Waste Ink Tube (2)
DISASSEMBLY & ASSEMBLY
20. Release the Waste Ink Tube.
21. Remove the Waste Ink Tube from the Joint Tank.
22. Pull out the Waste Ink Tube from the hole of the frame.
23. Pull the Waste Ink Tube from the larger clamp.
Waste Ink Tube
Clamp
Guide Frame
Clamp
Joint Tank
Disassembly and Assembly Procedure
When attaching the Waste Ink Tube, be careful of the following
points.

Route the tube through the larger clamp.

Route the tube through the hole on the frame.

Do not bend the tube or route it like an arch as shown below.
Doing so may cause waste ink flow backward.
Do not Bend.
Do not be an arch.
SE Group Confidential (Related Staff Only)
Revision B
(Figure 3-124)
(Figure 3-124)
Waste Ink Tube
Waste Ink Tube
181