SC-F9200 Series
4.11.10 Manual Bi-D Adjustment
C H E C K
Before performing the Manual Bi-D Adjustment, make sure to
P O I N T
carry out the Manual Uni-D Adjustment
PAPER USED
Size: 24 inch length or longer
Type: Premium Glossy Photo Paper (250)
EXECUTION MODE
Normal Mode
ADJUSTMENT PROCEDURE
1.
Load the paper in the printer.
2.
Turn the printer ON.
3.
On the control panel, select the
Media Setup
setting to
RIP Settings
"0".
4.
Start the Service Program and select
5.
Click [RUN], then the POPUP screen will be appeared.
ADJUSTMENT
(P. 325)
.
menu and change the
Select Media
Manual Bi-d
Adjustment.
Head Related Checks and Adjustments
Figure 4-50. [Manual Bi-D adjustment] Screen
6.
On the control panel, set [1.5] in
7.
On the control panel, set [0.2mm] in
adjustment pattern will be printed.
8.
Repeat adjustment until the number of the pattern with least visible lines falls
between 2 through 8.
SE Group Confidential (Related Staff Only)
Revision C
Platen
Gap.
Head
Alignment. and then press [OK], the
327