SC-F9200 Series
3.4.6.4 PF Motor Cooling Fan
1.
Remove the Left Rear Cover.
(p110)
2.
Remove the Left Upper Cover.
(p111)
3.
Remove the Left Cover.
(p114)
4.
Release the cable from the two clamps and wire saddle.
5.
Disconnect the cable from the relay connector.
6.
Remove the two screws, and remove the PF Motor Cooling Fan.
A)Silver M4x30 Bind machine screw: 2 pcs
DISASSEMBLY & ASSEMBLY
Relay connector
Disassembly and Assembly Procedure
Clamps
Cable
Wire saddle
Figure 3-164. Removing the PF Motor Cooling Fan
SE Group Confidential (Related Staff Only)
Revision B
PF Motor Cooling Fan
214