Epson SC-F9200 Series Service Manual page 131

SC-F9200 Series
3.4.4.4 Sub Board
(p98)
1. Unlock the CR Unit.
2. Remove the Left Rear Cover. (p110)
(p111)
3. Remove the Left Upper Cover.
(p139)
4. Remove the CR Cover.
5. Disconnect all cables and FFCs from the Sub Board.
6. Remove the four screws, and remove the Sub Board.
A) Silver M3x8 P-tite screw: 4 pcs
DISASSEMBLY & ASSEMBLY
- Upper side of the CR Unit -
Disassembly and Assembly Procedure
A
A
A
Figure 3-60. Removing the Sub Board
SE Group Confidential (Related Staff Only)
Revision B
Sub Board
A
131