Epson SC-F9200 Series Service Manual page 231

SC-F9200 Series
2. Secure the two screws with the ratchet screwdriver.
3-183)
3. Tighten the two screws fully with an L-shaped Offset
Screwdriver.
PF Roller Center Support
Screw
PF Roller Center Support
G
Figure 3-183. Removing the PF Roller Center Support 1
DISASSEMBLY & ASSEMBLY
(Figure
L-shaped Offset Screwdriver
Screw
G
Ratchet screwdriver
Disassembly and Assembly Procedure
10. Remove the hook from main frame by Flat-bladed Screwdriver, slide the PF Roller
Center Support to the left, and disconnect it from main frame.
Hook
Flat-bladed Screwdriver
Figure 3-184. Removing the PF Roller Center Support 2
SE Group Confidential (Related Staff Only)
Revision B
PF Roller Center Support
231