Epson SC-F9200 Series Service Manual page 234

SC-F9200 Series
3. Remove the After Heater in the direction of the arrow, and hook it with the third
protrusion from the top on the Front Frame.
4. Release the cables from the clamp.
5. Disconnect the cables from the three relay connectors, and remove the After Heater.
When installing the After Heater, be careful not to let the cables get
caught in between the heater and the main body.
DISASSEMBLY & ASSEMBLY
After Heater
Protrusion
Disassembly and Assembly Procedure
Clamp
After Heater
Figure 3-187. Removing the After Heater
SE Group Confidential (Related Staff Only)
Revision B
Front Frame
Protrusion (3rd)
Relay Connectors
Protrusion
234