Feed Adjustment (Manual Feed Adjustment) - Epson SureColor SC-S70600 User Manual

EPSON SC-S70600 series/SC-S50600 series/SC-S30600 series User's Guide
Buttons that are used in the following settings
A
After confirming that the printer is ready, press
the Menu button.
The settings menu will be displayed.
B
Select Media Setup and press the Z button.
C
Use the d/u buttons to select Customize
Settings and press the Z button.
D
Use the d/u buttons to select a media setting
bank number between 1 and 30 and then press
the Z button.
Note that any settings already saved in the printer
will be overwritten.
E
Use the d/u buttons to select Head Alignment
and press the Z button.
F
Use the d/u buttons to select Manual(Uni-D) or
Manual(Bi-D) and press the Z button.
G
The printer will print a test pattern.
When printing is complete, the media will
automatically be fed to a position where the
pattern is clearly visible.
Cut the media if necessary.
"Cutting Media" on page 54
U
Note:
To rewind the media, press u.
Basic Operations
H
Check the pattern and select the pattern number
that has the least gaps.
In the following example, this would be pattern
number 2.
C1
1
I
When C1 is displayed in the control panel, use
the d/u buttons to select the number recorded in
Step 8 and press the Z button.
J
Select the numbers for all colors and press Z.
K
The media setup menu will be displayed when
you enter the pattern number for the last color.
Feed Adjustment (Manual
Feed Adjustment)
Feed Adjustment is used to correct banding (horizontal
banding, lines, or strips of uneven color).
Feed Adjustment can be performed automatically or
manually.
For more information on automatic feed adjustment,
see U "Feed Adjustment" on page
This section explains how to perform manual feed
adjustment.
Two methods are available:
❏ Visually inspect print results and enter a correction
by hand.
67
2 3
62.