Switch Between Ink Cartridges And Ink Tanks - Epson SC-F9200 Series Service Manual

SC-F9200 Series

4.12.2 Switch between Ink Cartridges and Ink Tanks

EXECUTION MODE
Normal Mode
PROCEDURE
1. Turn the printer ON.
2. Take a picture of control panel. If you don't have camera, see the charge
status(available ink status bar ) and reservation status on the control panel and
write them down.(Refer to Figure
C H E C K
If firmware has Charge & Reservation, and when you select the Ink
P O I N T
cartridges for service after performing Step3, Charge &
Reservation will be unavailable temporarily.
When returning to Ink tank, and when you select the Ink tanks
after performing Step3, Charge & Reservation will be available
again. Also, Charge status & Reservation status will return to the
original status. (before-cartridge-installation status.)
Take a picture of control panel or take a memo so that you can
check whether the charge status and reservation status are
returned originally.
Without
Reservation(Gray)
Figure 4-52. How to check the Reservation status
(Left: There is No-Reservation Right: There is Reservation)
3. Start the Service Program and select
tanks.
4. Select from All channels or Single
select the Ink Holder to be changed
to be changed (C/Y or M/Bk).
ADJUSTMENT
4-52.)
Charge Status
(available ink status bar )
With
Reservation(White)
Switch between Ink cartridges and Ink
channel. When selecting Single channel, also
(Ink Holder 1 or Ink Holder 2) and the color
Ink Supply Related Checks and Adjustments
5. Select the Ink Tank or Ink Cartridge for
6. Click [Run].
C H E C K When switching to Ink tanks from Ink cartridges, Make sure
P O I N T
charge status and reservation status are returned to the original
status by comparing the picture or note which you wrote on Step2.
7. Turn off the printer.
C H E C K To make the settings effective, make sure to turn off the printer.
P O I N T
Figure 4-53. [Switch between Ink cartridges and Ink tanks] Screen
SE Group Confidential (Related Staff Only)
Revision C
service.
330