Ink Or Cleaning Liquid Eject - Epson SC-F9200 Series Service Manual

SC-F9200 Series

4.12.4 Ink or Cleaning Liquid eject

C H E C K
Due to the structure of this printer, you cannot replace only one
P O I N T
tank. Therefore, replacement of the tanks should be made
according to the combinations below.
•
BK and M
•
Y and C
EXECUTION MODE
Serviceman Mode
PROCEDURE
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu] + [Back] + [OK].
2. Discard the waste ink.
3. Remove either of the ink tanks, cleaning cartridges or ink cartridges of the colors
to exchange.
4. Lower the lock levers.
5. Start the Service Program and select
6. Select from All channels or Single
select the Ink Holder to be ejected
to be ejected (C/Y or M/Bk), and click [Run].
Running the Ink eject function one time is not enough to prevent
C A U T I O N
ink from leaking when removing the ink tubes. Prepare paper or
cloth to wipe off leaked ink in advance or run the Ink eject function
twice in a row.
7. When finished, click [Finish].
8. Turn off the printer.
ADJUSTMENT
Ink or Cleaning Liquid eject.
channel. When selecting Single channel, also
(Ink Holder 1 or Ink Holder 2) and the color
Ink Supply Related Checks and Adjustments
Figure 4-55. [Ink or Cleaning Liquid eject] Screen
SE Group Confidential (Related Staff Only)
Revision C
332