Epson SC-F9200 Series Service Manual page 103

SC-F9200 Series
3.4.3.2 Right Upper Cover
1. Remove the Media Loading Lever.
2. Remove the Panel Unit. (p101)
3. Push the Media Loading Lever Frame toward the rear of the printer to move the
lever to its release position.
Media Loading Lever Frame
Figure 3-19. Moving the Media Loading Lever Frame
DISASSEMBLY & ASSEMBLY
(p210)
Disassembly and Assembly Procedure
4. Remove the four screws, and remove the Board Right Frame.
A) Silver M3x6 screw: 4 pcs
- Right side -
Figure 3-20. Removing the Board Right Frame
SE Group Confidential (Related Staff Only)
Revision B
A
A
Board Right Frame
A
A
103