SC-F9200 Series
3.4.3.15 Front Cover R Sensor
1.
Remove the Media Loading Lever.
2.
Remove the Panel Unit.
(p101)
3.
Remove the Right Upper Cover.
(p117)
4.
Remove the Board Box Cover.
5.
Disconnect the cable from the connector (CN271) on the Main Board.
6.
Release the cable from the five clamps.
7.
Release the cable from the three FFC clamps.
DISASSEMBLY & ASSEMBLY
(p210)
(p103)
Disassembly and Assembly Procedure
- Right upper side -
FFC Clamp
Front Cover R Sensor Cable
Clamp
- Right rear side -
CN271
Figure 3-41. Releasing the Cable
SE Group Confidential (Related Staff Only)
Revision B
FFC Clamps
Clamps
Clamp
Main Board
Clamp
120