Cleaning The Color Toner Density (Ctd) Sensor - Fuji Xerox DocuPrint CP116 w User Manual

 Cleaning the Color Toner Density (CTD) Sensor
Clean the CTD sensor only when an alert for the CTD sensor is shown on the Printer Status window or operator
panel.
1
Turn off the printer and disconnect the power cord.
2
Push the rear cover handle and open the rear cover.
3
Clean the CTD sensor inside the printer with a clean dry cotton swab.
4
Close the rear cover.
5
Connect the power cord and turn on the printer.
144 Maintenance