Engine Logic Board Failure - U6-2, 3, 4, 5, 7; Paper Size Jam - E1-1 Regi Area Jam - Fuji Xerox Phaser 5500 Service Manual

Table of Contents

Advertisement

Engine Logic Board Failure - U6-2, 3, 4, 5, 6, 7
Engine Logic Board components have failed.
Applicable Error Codes
Engine Logic Board Failure - U6-2 RAM Read/Write
Engine Logic Board Failure - U6-3 NVM Data Defect
Engine Logic Board Failure - U6-4 NVM Read/Write
Engine Logic Board Failure - U6-5 CP/U Power NVM
Engine Logic Board Failure - U6-6 ASIC/CRUM
Engine Logic Board Failure - U6-7 PPM Data
Engine Logic Board Troubleshooting Reference
Applicable Parts
Engine Logic
Board
Engine Logic Board Troubleshooting Procedure
Step
Actions and Questions
1
Does the error occur when the power is
cycled?
2
Check Engine Logic Board connections.
Are all the connectors connected?
3
Does the error reoccur when power is
applied?

Paper Size Jam - E1-1 Regi Area Jam

Paper did not pass the Registration Sensor located behind Door A, within the
specified time.
Applicable Error Code
Paper Size Jam - E1-1 Regi Area Jam
Error Messages, Codes, and Procedures
References
Engine Logic Board P/J Locator (page 10-13)
PL8.1 Print Engine Electrical (page 9-40)
Yes
Go to Step 2.
Go to Step 3.
Replace the
Engine Logic
Board
(page 8-89).
No
Problem solved.
Connect all
connectors. Go to
Step 3.
Problem solved.
3-35

Advertisement

Table of Contents
loading

Table of Contents