Siemens SINUMERIK 840DE sl Commissioning Manual page 1298

Animated elements
C.2 Modeling
Template
feed_traverse_line_hori.fxw
feed_traverse_line_vert.fxw
dimensioning_lines_hori.fxw
dimensioning_lines_vert.fxw
z1_inc.fxw
x1_inc.fxw
3d_coordinate_origin.fxw
3d_zero_point.fxw
Turning
Template
turning_blank.fxw
turning_centerline.fxw
turning_centerpoint.fxw
turning_refpoint.fxw
turning_machining_area.fxw
Milling
Template
milling_blank.fxw
milling_centerline.fxw
milling_refpoint.fxw
312
Description
Horizontal line to illustrate the tool path during feed
Vertical line to illustrate the tool path during feed
Horizontal projection lines
Vertical projection lines
Horizontal dimension line with the identifier Z1
Vertical dimension line with the identifier X1
3D coordinate origin
3D zero point
Description
The blank for turning technology: A simple cylinder
Center line
Coordinate origin to display the zero point in the
WCS
Reference point, for example, for a machining op‐
eration
Boundary lines for the machining area
Description
The blank for milling technology: A simple cube
Center line
Reference point, for example, for a machining op‐
eration
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1