5.3
Setting of the service switch (PCU 50.5 only)
Intended use
The "PCU Hardware Service" component as part of the PCU Base software provides a
function to read-out the switch positions.
Figure 5-2
Meaning of switch positions
Only the settings of the service switch that are relevant for the commissioning engineer are
listed:
Switch setting
PCU-Basesoftware (IM8)
Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
Rotary coding switch (hexadecimal)
Mode of operation
0
---
6
Users
9
Service
A
Service
C
Service
D
Service
E
Service
5.3 Setting of the service switch (PCU 50.5 only)
Function
Normal operation (default setting)
Reserved for additional software
Headless operation without OP/TP
Firmware recovery
Checking
Diagnostics
Booting from the emergency boot system
Service and diagnostics
125