Siemens SINUMERIK 840DE sl Commissioning Manual page 1116

Programming commands
6.2 Methods
Example
FOCUS
DLGL("The focus has been placed on variable << FOC << ".)
END_FOCUS
See also
FOC variable (Page 114)
6.2.6 LANGUAGE
Description
The LANGUAGE method is run through when the current language has changed for an opened
screen.
Programming
Syntax:
Description:
Parameters:
See also
Variable S_LANG (Page 118)
6.2.7 LOAD
Description
The LOAD method is executed after the variable and softkey definitions (DEF Var1= ...,
HS1= ...) have been interpreted. At this time, the dialog is not yet displayed.
130
LANGUAGE
<instructions>
END_LANGUAGE
Language
- None -
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1
SINUMERIK Integrate Run MyScreens (BE2)