Siemens SINUMERIK 840DE sl Commissioning Manual page 1496

Configuring the system
2.5 Configuration of the Service Center
2.5.3 Configuration of the host
You can make the network settings in the "Host Settings" tab and permanently save this
configuration, in contrast to the settings in the "Network Settings" dialog box of the Service
Center.
Settings that you make in this dialog box are stored in the
file.
Overview
You can make the following settings in the "Network Settings" dialog box:
Figure 2-5
Table 2- 2 IP settings in the "Host Settings" dialog box
Settings
Network enabled
Firewall enabled
Use Windows Settings
DNS Configuration > Computer Name
DNS Configuration > Suffix Search List
76
Host settings
servicesystem.ini
Purpose
Activate or deactivate the network interfaces of the PCU 50.5.
Activate or deactivate the firewall of the PCU 50.5.
Select whether the values set in the Control Panel are to be used.
Specify the DNS computer name.
Parameterize a search list for DNS suffix, e.g. "network.com".
The factory setting of the Ethernet interface "Local Area
Connection" is ".local".
Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
configuration
PCU-Basesoftware (IM8)