Siemens SINUMERIK 840DE sl Commissioning Manual page 1295

8. To create hatching, use file schnitt.png as the texture. The lines always go from the bottom
left to the top right at an angle of 45°. You should set the scaling to 3 in both dimensions.
The rotation depends on the construction type and must be adapted manually.
Figure C-4
9. We recommend the following sizes/dimensions for the blanks:
– Cylinder for turning operation:
– Cube for milling operation
See also
XML commands (Page 313)
C.2.3 Importing graphics (models)
In Flux Studio, you can import external graphics (models). You can store frequently used
models, such as tools, as .x3d or .hmi files centrally for further use as finished elements in
other help screens. You will find a list of supplied modeling templates in Chapter Modeling
templates (Page 311).
Complex objects can also be created with other modeling tools, such as Cinema4D, and then
imported.
A description of how you can reuse these models is given below.
Import as inline
Flux Studio uses the object "Inline" for importing .x3d files. It allows you to link in external
elements without multiplying the 3D data of these models.
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1
Settings for hatching
Length = 5.5 ; Radius = 1.4 (cf. template
x = 4.75 ; y = 3 ; z = 3 (cf. template
turning_blank.fxw )
milling_blank.fxw )
Animated elements
C.2 Modeling
309