Siemens SINUMERIK 840DE sl Commissioning Manual page 1465

2.1.3 This is how you set the IP address of the PCU
Default setting
Note
IP address in the system network
The IP address 192.168.214.241 is set as a factory default for every PCU on the system
network.
You must only perform the steps described below if you wish to change this default.
Procedure
1. Select the following on the PCU on the Service Desktop: "Start" → "Settings" → "Network
2. Double-click the Ethernet 2 interface you want to parameterize which is to be used for
3. Under the "General" tab, select "Internet Protocol (TCP/IP)" and click the "Properties"
PCU-Basesoftware (IM8)
Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
Connections".
The "Network Connections" window opens.
connecting the TCU or system network.
The "Ethernet 2 (System Network) Properties" window opens.
button.
The "Internet Protocol (TCP/IP) Properties" window opens:
Configuring the system
2.1 System settings
45