Siemens SINUMERIK 840DE sl Commissioning Manual page 1022

Fundamentals
3.4 Troubleshooting (log book)
3.4 Troubleshooting (log book)
Overview
If "Run MyScreens" detects errors when interpreting the configuration files, these errors will
be written to the easyscreen_log.txt text file. Only errors of the currently selected dialog are
entered. Error entries from previously selected dialogs are deleted.
The file indicates:
● The action during which an error occurred
● The line and column number of the first faulty character
● The entire faulty line of the configuration file
● The entries made by the DEBUG function
Note
Each entry has a prefix with the current time stamp in square brackets. This can be helpful,
for example, when analyzing time-critical configurations.
Saving easyscreen-log.txt
The file easyscreen_log.txt is saved in the following directory:
[System user directory] /log
Syntax
The system does not start to interpret the syntax until the start softkey has been defined and
a dialog with start and end identifiers as well as a definition line has been configured.
//S(Start)
HS6=("1st screen")
PRESS(HS6)
LM("Maske1")
END_PRESS
//END
//M(Maske1)
DEF Var1=(R)
DEF VAR2 = (R)
LOAD
VAR1 = VAR2 + 1
...
//END
36
; Error message in log book, as VAR2 has no value
Programming Manual, 12/2017, 6FC5397-1DP40-6BA1
SINUMERIK Integrate Run MyScreens (BE2)