Siemens SINUMERIK 840DE sl Commissioning Manual page 1518

Backing up and restoring data
4.8 Restore a disk image of a partition
3. Make the required settings here:
4. Confirm your settings with "Backup" to start generation of the disk image.
98
Section Settings
Base Ghost version
parameters
Source partition Select a data medium of which you want to create a data
Destination file
Base Connect share
parameters >
Destination file
Select
destination
Optional Split image size Split the disk image and select a split image size.
parameters
Compatible file
naming system
Compress
image
Purpose
Select the Symantec Ghost version that is to be used when
creating the disk image:
Version for Windows 7: "Ghost version 11.5.x"
•
Version for Windows XP: "Ghost version 8.2.x"
•
image.
Enter a destination directory and file name.
Disk images can be stored either locally or in the network.
Open the "Connect a Share" dialog box (Page 102).
You can set up a shared resource (e.g. a directory in the
network), to which you can store the disk image.
Call the "Select destination file" dialog.
You can navigate through a local directory on the PCU 50.5
and enter a file name.
You can split the disk image into several files of a defined size.
Split the disk image size in the following cases:
If the file system (e.g. FAT32) can only manage files of a
•
certain size.
If the disk image is to be archived onto multiple data
•
media, for example, when using CDs.
Select the compatibility of the name scheme.
This option is required so that a disk image with older versions
of the "PCU base software Windows XP" can be read in by
Windows XP.
It is not possible to use a different operating system on a PCU
50.x than the preinstalled system (e.g. Windows XP on a
PCU 50.5 Windows 7).
Activate Compression or select a compression level.
Higher compression results in a smaller file size, but increases
the time needed to compress or decompress the data.
Commissioning Manual, 02/2014, 6FC5397-1DP40-4BA0
PCU-Basesoftware (IM8)